 | ||||
| ||||
|
#1
20-05-11, 08:41
| ||||
| ||||
 03 vectra 2.2 elite
HI I HAVE AN 03 PLATE VECTRA 2.2 DIESEL ELITE I HAVE A PROBLEM WITH THE EXEON DIP BEAM HEADLIGHTS . MAIN BEAM WORKS FINE BUT BOTH DIP BEAM LIGHTS HAVE WENT OUT AT THE SAME TIME , REPLACED BOTH D2S BULBS , STILL NO DIP HEADLIGHTS , HAVE CHECKED ALL FUSES AND CANT FIND A BLOWN FUSE , I AN AT MY WITTS END WITH THIS . IS THER A RELAY OR SOMETHING THAT I AM MISSING . I BELIEVE THIS CAR HAS HAD THESE LEVELING XEON LIGHTS FITTED AS AN AFTER MARKET PART PRIOR TO ME BUYING THIS CAR . IF ANYONE CAN SHED SOME LIGHT ON THIS IT WOULD BE APPRECIATED , AS I AM AT THE POINT OF COMMITING SUICIDE WITH THIS THING  REGARDS JIM       |
|
#2
20-05-11, 10:26
| ||||
| ||||
| Re: 03 vectra 2.2 elite
is it a vectra b or vectra c? Im guessing C, with you saying its elite.
__________________ VECTRA B 2.6 CDX ALL MAKES VEHICLE DIAGNOSTICS (OPCOM TOO) |
|
#3
20-05-11, 14:34
| |||||||||||||||
| |||||||||||||||
Re: 03 vectra 2.2 elite
AFTER POSTING THIS THREAD I HAVE CHECKED AND IT IS A ccmodel | |||||||||||||||
|
#4
21-05-11, 20:16
| ||||
| ||||
| Re: 03 vectra 2.2 elite
I've not had any experience with the xenon's on a C, but on the B there is an ECU per headlight which controls the height of the lamps and provides the high voltage for the xenon to burn. If both have gone down, could it be a fault with the switch, ie. its not sending the signal to switch the xenons on. Vectra c's are CANBUS wired, so a fault may lie in the Column module. Best to get it on an opcom code reader.
__________________ VECTRA B 2.6 CDX ALL MAKES VEHICLE DIAGNOSTICS (OPCOM TOO) |
| The Following User Says Thank You to ASTOBBS For This Useful Post: | ||
 |
| Tags |
| elite, vectra |
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
Site by: TS-Webcreations
