[Tommo]

I have a 2.2 vectra Sri on a 55 plate and the dash has stopped working leaving me without revs, speed, milage, engine temp or fuel. Only light that comes up is the engine management light which disapears once the engine is running. I've done a little research and found it possibly could be the ABS sensor or the CIM or a few fuses. However this info was for the 1.8 so not 100% sure if the same diagnosis applies. Any help would be greatly appreciated

[Leeky]

The first place to look should always be your fuse boards mate.

The easiest way to verify everything is ok is to visually check each blade fuse for breaks in the fuse material. It sounds to me like its fuse related, or possibly a dash problem (which would be odd if the EML works still!).

I don't see how an ABS fault would cause this sort of reaction to be honest with you.